Smile Z1 _ HB Lcd problem Fixed Frimware Flash File
Smile Z1 _ HB
Smile Z1 HB
SMILE_Z1 [HB]_5.1__MT6580__ALPS.L1.MP6.V2_YUANDA6580.WE.L
SMILE Z1 HB MT6560
SMILE Z1 HB MT6560 5.1 Frimware LCD Problem Fixed File 100% ok
SMILE Z1 (HB) MTK6580 FLASH FILE
SMILE Z1 (HB) MTK6580 FLASH FILE
( Logo Hang Problem Solved File)
File: 100% OK
Brand : SMILE
ProdName : Z1
ProdModel : Z1
Device : SMILE
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2
Install ROM: Install with SP Flash Tool / SPD Upgrade Tool / Miracle / Cm2 / Others Tools 1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
SMILE Z1 (HB) MTK6580 FLASH FILE
( Logo Hang Problem Solved File)
ProdName : Z1
ProdModel : Z1
Device : SMILE
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2
Install ROM: Install with SP Flash Tool / SPD Upgrade Tool / Miracle / Cm2 / Others Tools 1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
